4:1 이중벽
◆ 4:1 매우 높은 수축률
◆ 연속사용온도: -55℃~125℃
◆ 수축온도: 120℃
- 설명
- 문의
Dual Wall Adhesive-Lined Heat-Shrink Polyolefin Tubing
Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of
electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
특징:
1. 4:1 매우 높은 수축률
2. Longitudinal shrink ratio: ≤+8%
3. Out jacket flame retardant, inner adhesive self-extinguished
4. Super sealing against water, moisture or other contaminants
5. Continuous operating temperature: -55℃~125℃
6. Shrink temperature: 120℃
Dimensions
크기 | 공급된 대로 | After recovery (mm) | 표준 패키지 | |||
인치 | mm | Inertnal Diameter(mm) | Inertnal Diameter | Total Wall Thickness | Wall Adhesive thickness of Adhesive | m/스풀 |
5/32 | 4.0 | 4 | 1 | 1.1±0.15 | 0.4±0.15 | 200 |
1/4 | 6.0 | 6 | 1.5 | 1.5±0.15 | 0.5±0.15 | 100 |
5/16 | 8.0 | 8 | 2 | 1.7±0.15 | 0.5±0.15 | 50 |
1/2 | 12.0 | 12 | 3 | 2.0±0.15 | 0.6±0.15 | 1.22m/pc |
5/8 | 16.0 | 16 | 4 | 2.3±0.25 | 0.6±0.15 | 1.22m/pc |
25/32 | 20.0 | 20 | 5 | 2.6±0.25 | 0.6±0.15 | 1.22m/pc |
1 | 24.0 | 24 | 6 | 3.0±0.30 | 0.7±0.15 | 1.22m/pc |
3/2 | 32.0 | 32 | 8 | 3.0±0.30 | 0.7±0.15 | 1.22m/pc |
2 | 52.0 | 52 | 13 | 3.3±0.30 | 0.7±0.15 | 1.22m/pc |
기술 데이터:
재산 | 시험 방법 | Stantard |
인장강도(Mpa) | ASTM D2671 | ≥10.4 |
연장 | ASTM D2671 | ≥300 |
Tensile Strength afterAging (Mpa) | UL 224 158×168hr | ≥7.3 |
Elongation after Aging(%) | UL 224 158℃×168hr | ≥200 |
유전 강도(kv/mm) | IEC 243 | ≥ 15 |
Volume Resistance(Ω.·cm) | ASTM D876 | ≥1× 1014 |
Hot Melting Adhesive Property
재산 | 시험 방법 | Stantard |
Water absorption ratio: | ASTM-D570 | <0.2% |
Softing point | ASTM-E8 | 95℃ |
Strength of pearing(체육) | ASTM-D1000 | 120N/25m |
Strength of pearing(AL) | ASTM-D1000 | 80N/25m |